Early Access Pilot • Built for AS9100 Rev D & ISO 9001 Machine Shops

Verify Mill Certs, Catch Alloy Traps & Build AS9102 Ship-Packs in 60 Seconds.

Stop spending 20 minutes per bar shipment with a yellow highlighter and re-typing heat numbers into Excel at 4:00 PM Friday. ProvaTrace checks incoming EN 10204 3.1 mill certs against spec and customer PO limits, converts metric MPa to ksi, checks DFARS 252.225-7009 melt origin, and exports ready-to-file AS9102 Rev C Form 2 packets.

Inspect Live Sample MTRs
< 60 sec
Target lot check vs. 20 min of manual highlighter & Excel
AS9102 Form 2
1-click Fields 5–10 CSV & Customer Ship-Pack cover
29 Countries
Automatic US & DFARS 225.872-1 qualifying melt check
EN 10204 3.1 • LIVE RECEIVING CHECK QA Controlled
17-4PH / Type 630 Bar (Cond H1025)
Heat H849201 • PO-44812-AERO • Melt: United States
DFARS Domestic
Cr (Chromium) 15.00–17.50% 15.82% PASS
Tensile (UTS) >= 155.0 ksi 164.5 ksi PASS
Elongation >= 12.0% 14.5% Smudged Scan
316L Carbon Trap <= 0.030% 0.048% HOLD
Works Alongside Your Existing Shop ERP & QMS
ProShop ERP JobBOSS² E2 Shoptech Global Shop Solutions Fulcrum AS9102 Rev C Form 2 CSV
Why Receiving & Shipping Bog Down

Turn a 20-Minute Clerical Chore Into a 60-Second Visual Sign-Off

Quality Inspectors shouldn’t spend hours converting units on a desk calculator or hunting network folders on Friday afternoon while parts sit on the shipping dock.

Without ProvaTrace • 15–25 Min / Heat

Yellow Highlighters, Desk Calculators & Friday 4 PM Holds

  • ×Reading crooked distributor PDFs line-by-line and manually converting European/Asian MPa tensile values to ksi.
  • ×Easy-to-miss traps—like straight 316 bar (0.048% C) stocked as 316L, Condition A vs. H900 tensile limits, or non-qualifying melt countries.
  • ×Re-typing Heat #, Spec Rev, Mill Name, and C of C numbers into Excel and AS9102 Form 2 right before shipment.
With ProvaTrace • Under 60 Sec / Heat

Side-by-Side Visual Proof & Instant Customer Ship-Packs

  • ✓Every chemical element, mechanical property, and DFARS 252.225-7009 melt country is highlighted directly on the certificate for quick visual check.
  • ✓Automatic alerts when a customer PO tightens carbon, oxygen, or yield limits beyond standard mill tolerances—before material hits the saw.
  • ✓One click exports AS9102 Rev C Form 2 (Fields 5–10) and a printable Stamped Customer Ship-Pack Cover Sheet across multiple heats.
Live Interactive Demo

Test the Receiving Workstation Right in Your Browser

Click through real aerospace receiving catches below, compile a multi-heat AS9102 Ship-Pack, or run an instant DFARS Melt-Country Check—with zero login required.

ProvaTrace Receiving Workstation

Quick-Test a Sample or Digital Mill Test Report

Runs locally in your browser • Automatically converts metric MPa tensile & yield rows to ksi
Have Copier / Flatbed Scanned PDFs from Ryerson, Castle, or TW Metals? This instant browser demo reads searchable digital PDFs and pasted text locally without uploading files. In your $0 30-Day Shop Pilot, we enable full multi-page scanned PDF OCR tuned to your regular metal distributors — Start 30-Day Pilot ($0) →

Shop PO & Material Master Tolerance Rules

Define customer PO flowdown overrides (such as C <= 0.030% or UTS >= 135 ksi) without bundling copyrighted standards.
Element (%) & Mechanical (ksi / % / HRC) Min/Max Overrides *

Loading MTR Verification...

Pending QA Sign-Off
DFARS 252.225-7009 Specialty-Metals Origin Check --
Element / Property Spec Min – Max Heat Actual OCR Check Result
Quality Inspector Verification & AS9102 Release Visually cross-check certificate regions before signing
Open Ship-Pack Vault (0)

Source EN 10204 3.1 Certificate View

Click any highlighted extraction box to cross-check specification tolerances
--
--
--
--
Material / Grade: --
Heat / Melt Lot: --
Quantity / Weight: --
Specification Basis: --
Multi-Heat Customer Ship-Packs & Zero Lock-In: Sign off single lots in Tab 1 (or click Load 2 Sample Verified Heats below), select the heats used on a job, and export a combined AS9102 Rev C Form 2 CSV + printable Customer Ship-Pack Cover Sheet.

Verified Heat-Lot Receiving Vault

0 Saved Heats
Heat / Lot # PO # Alloy & Spec Supplier / Mill & Melt DFARS Status QA Inspector & UTC Release Digest
No signed heats in your Receiving Vault yet. Sign off a certificate in Tab 1 or click “Load 2 Sample Verified Heats” to preview multi-heat Ship-Pack compilation.
Multi-Heat Customer Ship-Pack Compiler (AS9102 Form 2 + Printable Cover Sheet) 0 Heats Selected

DFARS 252.225-7009 Specialty-Metals Origin Lookup

29 Qualifying Countries
Optional Steel Alloying % (Checks Specialty-Metal Thresholds)

Melt-Origin Result & Audit Note

Ready

Select a melt country and alloy family on the left to check whether the heat qualifies under DFARS 252.225-7009 and DFARS 225.872-1.

Zero-Risk Shop Evaluation

How the $0 30-Day Founding Shop Pilot Works

No $5,000 QMS implementation fees, no ERP migration, and no credit card required upfront. Prove it on your own receiving dock first.

DAYS 1–2 • SUPPLIER TUNING

Send 3–5 Typical Distributor MTRs

Share a few typical multi-page certs from your regular suppliers (Ryerson, Castle, TW Metals, or mills). We verify clean extraction on your scans and pre-load your common customer PO spec overrides.

DAYS 3–30 • LIVE DOCK USE

Verify Incoming Heats in 60 Seconds

Your receiving inspector reviews incoming bar, plate, and forging certs side-by-side, visually confirms any low-contrast cells, signs off lots, and builds real AS9102 Form 2 Ship-Packs at $0 cost.

DAY 30 • ZERO LOCK-IN

Keep Every Export, Stay Only If It Pays Off

Every AS9102 CSV, Stamped Receiving Ticket, and Ship-Pack Cover Sheet you export is yours permanently in open formats. Subscribe at your locked Founding rate ($199 or $349/mo) only if your team wants to keep it.

Customer & Auditor Deliverable

Ready-to-File AS9102 Rev C Form 2 & Ship-Pack Cover Sheets

Eliminate Friday afternoon transcription typos. Every verified heat lot maps directly into AS9102 Form 2 Fields 5–10 and compiles into a clean multi-heat traceability cover sheet for Prime SQE source inspection.

AS9102 Rev C Form 2 — Product Accountability (Raw Material) QA Released
5. Material Name 6. Spec No. 8. Supplier & Melt 9. Appr. 10. C of C / Heat #
17-4PH H1025 AMS 5643 / PO Keystone [US Melt] Yes Heat H849201
Alloy 718 Bar AMS 5662 VDM [DE Qualifying] Yes Heat H718-99402
Transparent Shop Pricing

Flat Monthly Plans — $0.00 Upfront for 30 Days

No per-seat upcharges on Pro, no annual contract traps, and no setup fees. Lock your 24-month Founding Shop rate today and pay nothing unless you choose to continue after Day 30.

Shop Starter
5–25 employee ISO 9001 & precision CNC job shops
$199 / month
$0.00 today • 30-day pilot evaluation
  • ✓Up to 150 MTR packets / month
  • ✓3 Quality & Receiving inspector seats
  • ✓Side-by-side certificate bounding-box check
  • ✓DFARS 252.225-7009 melt-country screening
  • ✓10-year searchable Heat-Lot Audit Vault
Multi-Site
Multi-plant fabricators & specialty metal distributors
$599 / month
$0.00 today • 30-day multi-facility pilot
  • ✓Up to 2,000 MTR packets / month
  • ✓Isolated multi-facility plant workspaces
  • ✓ERP CSV & webhook feeds (ProShop, JobBOSS, E2)
  • ✓Read-only registrar & prime SQE audit view
  • ✓Anytime 1-click full JSON + CSV archive export
Common Shop Questions

Straight Answers for Quality Managers & Shop Owners

How ProvaTrace fits into daily receiving inspection, scanned supplier PDFs, AS9100 audits, and shop data security.

Does it read multi-page scanned PDFs from Ryerson, Castle, or TW Metals?
Yes in your 30-Day Pilot workspace. While the instant homepage demo runs locally in your browser on digital PDFs and pasted text, pilot shops receive full multi-page scanned PDF OCR tuned to your regular metal distributors—flagging any low-contrast smudged digits in amber so your inspector can verify them visually.
Does automated checking replace our Quality Inspector’s sign-off?
Never. AS9100 auditors require human accountability. Every parsed certificate stays in Pending QA Sign-Off until your authorized inspector visually verifies the highlighted regions on the mill certificate and clicks release, logging their name, stamp ID, and timestamp.
What if a customer drawing tightens tolerances beyond standard mill specs?
Use Customer PO Overrides to save tightened shop or prime requirements (for example, C <= 0.030% on dual-certified 316/316L or higher minimum yield strength). ProvaTrace checks incoming heats against both the mill-printed spec row and your PO override.
Do we have to change how we use ProShop, JobBOSS, or E2?
Zero ERP changes required. Shops run ProvaTrace at receiving to catch bad heats early, then drop the exported Stamped Receiving Ticket, Customer Ship-Pack Cover Sheet, and AS9102 Form 2 CSV straight into their existing ERP job traveler or FAIR folder.
How do you handle ITAR blueprints and supplier data privacy?
ProvaTrace is strictly for commercial raw-material Mill Test Reports—part CAD drawings and ITAR/CUI technical data are never needed and are automatically blocked before extraction. Your supplier certificates and pricing are never shared or used to train external AI models.
What happens to our records if we stop after the 30-day pilot?
You keep 100% of your data with zero lock-in. Export your entire verified heat log, inspector sign-offs, PO tolerance profiles, and AS9102 Form 2 schedules in open CSV, HTML/PDF, and JSON formats in one click at any time.